Tongue & Groove

Our white pine T&G has been kiln-dried and is ready for installation and finishing. Two distinct faces allow you to create different looks for your project depending on the side you choose to display.The boards can be supplied in 8 ft., 10 ft.,12 ft.,14 ft.,16 ft., or a random mix of these lengths. For projects that can handle a little more character, an economical option may be our cabin grade material. These boards come in random lengths of 1″ x 6″, 1″ x 8″, and/or 2″ x 6″. We have a variety of stain and finishing options to choose from. Visit the Stain and Finishes page for all the options.

COST PER PIECE

Standard Grade

1 x 6	/LF	8'	10'	12'	14'	16'
Unfinished	$0.70	$5.60	$7.00	$8.40	$9.80	$11.20
Prefinished w/ Clear Coat	$1.35	$10.80	$13.50	$16.20	$18.90	$21.60
Prefinished w/ Stain and Clear Coat	$1.46	$11.68	$14.60	$17.52	$20.44	$23.36

1 x 8	/LF	8'	10'	12'	14'	16'
Unfinished	$0.98	$7.84	$9.80	$11.76	$13.86	$15.68
Prefinished w/ Clear Coat	$1.68	$13.44	$16.80	$20.16	$23.52	$26.88
Prefinished w/ Stain and Clear Coat	$1.81	$14.48	$18.10	$21.72	$25.34	$28.96

2 x 6	/LF	8'	10'	12'	14'	16'
Unfinished	$1.38	$11.04	$13.80	$16.56	$19.32	$22.08

Cabin Grade

Cabin grade boards only come in a mix of random lengths between 6′ and 16′. Below is our price per Linear Foot.

Size	/LF
1 x 6 Unfinished	$0.50
1 x 8 Unfinished	$0.67
2 x 6 Unfinished	$0.75

Specifications

1″ X 6″ TONGUE & GROOVE

Our white pine 1 x 6 T&G is kiln dried and ready for installation. One side has a center and edge bead and the other side has a smooth face and a V-groove where two pieces come together.

How much do I need? To cover one square foot of surface requires 2.4 LF of 1×6 T&G. We recommend ordering 5 – 7% extra to account for installation waste.

V-Groove Side

Beaded Side

1″ X 8″ TONGUE & GROOVE

Our white pine 1 x 8 T&G is kiln dried and ready for installation. One side has a center and edge bead and the other side has a smooth face and a V-groove where two pieces come together.

How much do I need? To cover one square foot of surface requires 1.75 LF of 1×8 T&G. We recommend ordering 5 – 7% extra to account for installation waste.

V-Groove Side

Beaded Side

2″ X 6″ TONGUE & GROOVE

Our white pine 2 x 6 T&G is kiln dried and ready for installation. One side has a smooth face and the other side has a v-groove where the two pieces come together.

How much do I need? To cover one square foot of surface requires 2.4 LF of 2×6 T&G. We recommend ordering 5 – 7% extra to account for installation waste.

Flat Side

V-Groove Side

CABIN GRADE

Our cabin grade boards are pieces that have been rejected as standard grade material. The most common reasons for this are large knots, open knots, broken tongues, or cracks in the board. The material comes in random lengths of 1″ x 6″, 1″ x 8″, or 2″ x 6″. Dimensions and profiles are the same as the products shown above. Shown below are typical defects of our 1″ x 6″, 1″ x 8″ and 2″ x 6″ cabin grade boards.

How much do I need? To cover one square foot of surface requires 2.4 LF of 1×6 & 2×6 T&G and 1.75 LF of 1×8 T&G. We recommend ordering 10-12% extra to account for installation waste and material not suitable for construction.

1″ x 6″ & 1″ x 8″ Defects

Broken Tongues

Cracks

Open Knots

2″ x 6″ Defects

Discoloration

Planar Skip Rough Areas

Open Knots

Large Knots

Pre-Finish Options

Clear Coat

Two coats of clear polyurethane are applied (1×6 clear polyurethane coat: Adds $0.65/LF) or (1×8 clear polyurethane coat: Adds $0.70/LF)

Stain + Clear Coat

Send us your custom stain formula or use one of our standard colors (1×6 stain + clear coat: Adds $0.76/LF) or (1×8 stain + clear coat: Adds $0.83/LF)